BCGQG - ITEK PHOTOCOPY PPO DEVELOPER,PART A

  • MSDS: BCGQG
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: ITEK PHOTOCOPY PPO DEVELOPER,PART A
  • National Stock Number: 6750-00N000920
Product Identification

Product ID:ITEK PHOTOCOPY PPO DEVELOPER,PART A
MSDS Date:03/02/1982
FSC:6750
NIIN:00N000920
MSDS Number: BCGQG

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650

Emergency Phone: 716-722-5151

Info Phone: 716-722-2121

Cage: 19139

Contractor
EASTMAN KODAK CO GOVERNMENT MARKETS CONTRACTS
ROCHESTER, NY 14650-1115 US

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

Ingredients

2-PHENETHYLISOQUINOLINIUM BROMIDE

CAS: 10249-13-5

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:ORAL LD50(RAT):400-800MG/KG (SUP DAT)
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF OVEREXPOSURE
SECTION
Explanation of Carcinogenicity:N/A
Effects of Overexposure:INHALATION:DUST MAY CAUSE UPPER RESPIRATORY
TRACT IRRITATION. EYES:CAUSES EYE IRRITATION. SKIN:PROLONGED OR
REPEATED SKIN CONTACT MAY CAUSE SKIN IRRITATION.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:IMMED FLUSH W/ LARGE AMOUNTS OF WATER FOR AT LEAST 15
MIN. AND GET MEDICAL ATTENTION. INHALATION:REMOVE FROM EXPOSURE.
SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) GET MEDICAL
ATTENT ION. SKIN:IMMEDIATELY FLUSH SKIN WITH PLENTY OF WATER.
INGESTION:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:WEAR SUITABLE PROTECTIVE EQUIPMENT.AVOID INHAL
AND/ SKIN CONTACT.SMALL AMT:FLUSH MATL TO SEWER W/LGE AMTS OF
WATER.LGE AMTS:MAKE UP INTO SMALL PACKAGES WITH PAPER OR OTHER
FLAMMABLE MATERIAL FOR INCIN ERATION.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:NONE
Other Precautions:N/K

Exposure Controls

Respiratory Protection:AN APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR
FOR DUST SHOULD BE WORN IF NEEDED.
Ventilation:LOCAL:IF NEEDED TO CONTROL DUST. MECHANICAL:RECOMMENDED.
Protective Gloves:SHOULD BE WORN
Eye Protection:CHEMICAL WORKER GOGGLES
Other Protective Equipment:N/K
Work Hygienic Practices:N/K
Supplemental Safety and Health
PCT VOLT-VOL:N.FL PT MTD:N.RT OF ENTRY:LD50-LC50 MIX:INTRAPERITONEAL
LD50(RAT):50-100MG/KG.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:NEGLIGIBLE
Vapor Density:NOT APPLIC
Spec Gravity:>1.0
Solubility in Water:MODERATE
Appearance and Odor:WHITE POWDER - ETHEREAL ODOR
Percent Volatiles by Volume:N/K-FP
Corrosion Rate:

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:DISPOSE IN INCINERATOR EQUIPPED WITH AFTERBURNER
AND SCRUBBER.WASH AREA WITH SOAP & WATER. FEDERAL, STATE AND LOCAL
REGULATIONS TAKE PRECEDENCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.